How can we help You?  USA. 310-533-5109  SE HABLA ESPAŅOL
Site Map
Sign In
Register
Follow us
Clean Room
Call us: (310) 533-5109
AM-1
Paionia Air Vaccum Mat
PS-3N
Paionia Water Sole cleaner
BC-W-N
Paionia Boot Cleaner
CL-G-L-N
Clean Locker with germicidal lamps
MAC10
Envirco HEPA Fan Filter Unit.
SD Model
Standard Air Shower
You can use just keep on a passage or entrance of the building, is removed by air suction and spring brush the dirt adhering to the wheels and sole, <air adsorption mat> is the doormat of energy-saving high-performance. Starting with restaurants, hospitals, pharmacies gaming facility or dealer, intense cleanliness is important comings and goings of customers, it is recommended to all shops and facilities.
Cleaning deep into the irregularities of the sole It is said that about 70% of the dirt and dust brought into factories as something that was attached to the sole of the workers. By a special rotating brush mechanism, "shoes cleaner" will wash firmly deep into the irregularities of the sole such as work shoes, boots. Easy cleaning of only walk Was placed at the entrance and precision equipment factory and food factory, cleaning is complete only walk slowly over its workers. Also bactericidal effect: If using, for example, an appropriate amount of
The rules are very simple. Just walk slowly between the special rotating brush, "boots washer" will be able to wash the boots a whole, including the sole. Ideal for food factory If using, for example, an appropriate amount of sodium hypochlorite wash water, also allows sterilization. Available in a variety of fields, including food factory.
Necessities of food factory By the effect of ultraviolet germicidal lamps and hot air fan, clean locker "Sahara" is done at the same time drying and sterilization of shoes and work clothing. It is a locker that can not miss in production sites cleanliness and food factory is important
Features: Low watts, low sound, low profile Three-speed switch featuring low, medium and high setting standard on all 2 ft x 4 ft (600 mm x 1,210 mm) units Solid State Speed Control standard on 2 ft x 2 ft (600 mm x 600 mm), 2 ft x 3 ft (600 mm x 905 mm), and 2 ft x 3.5 ft (600 mm x 1,057.5 mm) units High Efficiency Particulate Air (HEPA) filter is standard Snap-in prefilter; no tools required Walkable plenum (excluding prefilter) provides a durable and sturdy walking surface Various sizes and voltages available for worldwide applications Meets latest IEST Recommended Practices
Plastic laminate finish All surfaces are sealed Commercial duty aluminum doors with 1/4" tempered glass 99.97% absolute filters 30% pre-filters Micro processor control system 5 HP direct-drive (except on SD4848) Factory pre-wired & tested Disconnect / motor starter / with short circuit and overload protection Emergency panic switch
Compact and lightweight – ideal for use in hard-to-reach areas such as corners, walls and ceilings. At just 4.5" (115 mm) tall, MiniFogger III fits easily in the palm of your hand Energy-efficient operation – uses less compressed air than other units while producing very small drops in the 6.7 to 12 micron size for fast evaporation Materials of construction offer good chemical resistance and are suitable for use with deionized water Choice of stainless steel flat spray set-ups for flow rates ranging from 0.24 to 1.22 gph (0.9 to 4.6 l/hr) Automatic spray pattern alignment Easy to maintain – no tools required
Mini Fogger III
Humidification Unit
Critical Process Wipers
Wipes
All critical process wipers are composed of 100% polyester knit material All critical process wipers are laundered in an ISO 4/Class 10 cleanroom with lot traceability on every pack Dry wipers are vacuum-packed in an ISO 4/Class 10 cleanroom Sealed-edges – wide sealed edge, fine ultrasonic, or fine laser sealed edges are offered. Tear-resistant for tough cleaning Compatible with Gamma Irradiation Work well with IPA, acetone and other solvents